Product classification
Hot Products
MAGNATE Plastic Steel Solenoid Valve
Are you still hesitating? Any questions, contact us!
Product Category
Keywords:Humidity sensing controller
MAGNATE Plastic Steel Solenoid Valve
Email:
yuanda@gzyuanda.net
Are you still hesitating? Any questions, contact us!
Product classification
Keywords
- Description
-
Standard
◍Connection method: Threaded (internal thread)
◍Attached 24 Volt AC Solenoid (24VAC)
◍Inrush current: 0.20A at 60Hz
◍Holding current: 0.14A at 60Hz
◍Confirm that the power voltage matches the marking on the solenoid.
◍The switch has a time lag (within 5 seconds)
◍Piping method: Install according to the instructions on the water inlet and outlet markings.
◍Material: Corrosion-resistant plastic steel valve body, stainless steel spring and screws, diaphragm made of special material, temperature resistant up to 75℃
◍Control method: Normally closed, the valve opens only when the power is turned on, and it can also be manually controlled (with a manual adjustment valve)
◍A pressure gauge needs to be installed in the equipment room to check the normal pressure.
◍Before and after installing the solenoid valve, all pipelines must be thoroughly flushed. It is recommended that the water source must use a filter to filter the water source to ensure normal system operation.
◍Function: Water flow switch control, using a small amount of water to control a large amount of water, easy to maintain, easy to clean, economical and durable, low failure rate


Solenoid

◍Voltage:
1、24VAC 50/60Hz
Inrush current: 0.30A at 50Hz
0.20A at 60Hz
Holding current: 0.19A at 50Hz
0.14A at 60Hz2、24VDC: Inrush/Holding current: 0.19A
Starting voltage range: 19.2~26.4Voltage
Maximum operating pressure: 0~12bars
Query Now
Note: Please leave your contact information and our professionals will contact you as soon as possible!
Related Products